YG YGP YPG辊道电机安装编码器视频
YGP East column roller table uses variable frequency speed regulation three-phase asynchronous motor (hereinafter referred to as frequency conversion roller table motor), which is always used to move the work roller of metallurgical painting industry separately. The control system composed of converter power supply and variable speed regulation device can make the motor get smooth stepless speed regulation, the variable speed mechanism is simple and the speed is accurate. The purpose of energy saving and automation is YGP series variable frequency roller motor with high starting torque, strong over-education ability, low starting current, fast and stable starting and speed regulation range.
The utility model has the advantages of high precision, fixed operation and maintenance, and is convenient for operation and maintenance.
YGP series variable roller table motor is suitable for starting, braking, speed regulation and other working conditions, especially for frequent positive and reverse.
On the quilt equipment, it can also be applied to its public machinery and equipment.
YGP series variable frequency roller motor is closed, self-cooling, cooling mode is [C410: motor shell protection stage is EP54 or 1P65: motor adopts [class or mountain level insulation], class F insulation motor is suitable for places where ambient air temperature does not exceed 10, and mountain insulation motor meets for places where ambient air temperature does not exceed 60C). YGP series hot roller table motor can normal tower elevation not exceeding 1000mrt under the following working conditions
two。 Ambient air temperature does not exceed 60 'class final): 3. Indoor gray place: 4 frequent civil opportunity perturbation and impact. 5. Tight starting, braking and reversal
The rated voltage of VCP series variable frequency roller motor is 380V, the rated frequency base is 9) is 501z. Motor stator flow flat
For Ya according to the method or human connection method, suitable for frequency converter power supply. The rated frequency (that is, the base mode) written in the loft seat can be customized at 20 50Hz according to the user's request.
YGP 系列辊道用变频调速三相异步电动机（以下简称变频辊道电动机)，采用变烦器供电，与变烦调速装置组成的控制系统可使电动机得到平滑的无级调速，加装编码器，转速准确，可选到节能和实现自动化的目的 YGP系列变频辊道电动机的起动转矩高，过教能力强，起动电流小，起动快速平稳，调速范围
YGP系列变频辊道电动机为封闭型，自冷武、冷却方式为[C410：电动机外壳防护级为 EP54或1P65：电动机采用F级绝缘电动机适用于环境空气温度不超过 10的场所，山级绝缘电动机用于环境空气温度不超过60C的场所。 YGP系列变频辊道电动机在下列工作条件下能够正常海拔不超过1000mrt
2.环境空气温度地高不超过60' : 3.室内多灰全的场所: 4经常Y用于频繁启动与冲击. 5.顿紧的起动、制动和反转
变频辊道电动机的额定电压为380V，额定频率基9)为501z。适用于变频器供电。洛机座写的额定频率(即基模)可按用户要求在20 50Hz而选择定做。电动概的工作转阳:基频以下为恒轻短，华绷以上为面功丰，加率变化范国 5-100Hlz.YGP条列变频道电机的标准工作制为S5 8O%.